This product is an occupancy/ presence motion sensor by using PIR passive infrared it continuously scans the preset operating zone and immediately switches the load light on when it detects any movement in the area.
To summarize this means whenever movement is detected within the set range of the sensor the load light will switch on automatically to illuminate the area you have set up to light. While there is movement within the range of the unit the load light will remain on.
This unit can identify day and night automatically, you can adjust ambient light according to your desire. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in just darkness on 3LUX when it is adjusted on the “3” position (min). If you want the sensor working day and night you will set it to sun position and if you want it working just when it is dark you set it to 3 position. You can adjust to have it working in different light levels of your choice by using the Lux control knob to change to desired lux level. As for the adjustment pattern, please refer to the testing pattern.
Time-Delay is added continually: A delay time setting (10 sec to 15 mins) is provided so that you can set how often you want the motion detector to check the room for. The longer this time is set, the longer the lights will remain on after you leave the room For E.g. If you set for 3 mins, every time it detects motion it will turn on and stay on as long as there is movement within the range of the unit. After your last detection it will stay on for 3min Time delay set before it switches off. The load (light) will stay on for 3 mins after your last detection then switch off.
|DETECTION RANGE||6M Max|
|RATED LOAD||800W (incandescent lamp) 400W (energy-saving lamp)|
|TIME DELAY||10sec 3sec to 15min2min(adjustable)|
|INSTALLATION HEIGHT||2.2- 4m|
- Stock: In Stock
- Model: UKEWST45A